Others

Mitutoyo Global
  1. Home
  2. Probes for Coordinate Measuring Machines

Probes for Coordinate Measuring Machines

media
Product Information

Touch-trigger Probes

TP200

TP200 is a compact high-accuracy touch-trigger probe. It has an outside diameter as small as ø13.5 mm, which greatly contributes to probing complex portions of a workpiece. With the combined use of an appropriate probe extension it can probe even deeper locations.

TP20

TP20 is a compact touch-trigger probe. It has an outside diameter as small as ø13.2 mm, which greatly contributes to probing complex portions of a workpiece. With the combined use of an appropriate probe extension it can probe even deeper locations.

MH20i

MH20i is a touch-trigger probe with manual probe head. The probe head of the MH20i has a structure that not only permits its position (probe orientation) to be manually changed but also provides a maximum of 168 orientations (at a positioning repeatability σ ≤ 1.5μm).

MH20

MH20 is a touch-trigger probe with manual probe head. The operator can change the probe orientation by hand (simply loosen the knob on the right-hand side and change the position, then re-fasten the knob).

 

Non-contact Probes

CF20

The CF20 is a centering microscope that enables measurement of small holes and elastic bodies which are difficult for a touch-trigger probe to measure.

 

Probe Heads

MIH

MIH is a manual probe head. It permits the mounted probe orientation to be manually indexed to a maximum of 168 different positions with a repeatability of 2σ ≦ 0.15μm.

PH1

PH1 is a manual probe head for use with the TP200 and TP20. The operator can change the probe orientation by hand. It is possible to insert a probe extension that is a maximum of 200 mm long.

Catalogue
Product Video
General Catalogue E-Book
For More Enquiries

Copyright © 2022 Mitutoyo Asia Pacific Pte Ltd.
All rights reserved