Special Micrometers
Caliper Type Outside Micrometer
- The standard type can measure a part to which the anvil may not access
Fixed Anvil Type Screw Thread Micrometer
- For measurement of the pitch diameter of thread
- Fixed anvil
Interchangeable Tip Type Screw Thread Micrometer
- For measurement of the pitch diameter of thread
- Interchangeable anvils depending on the screw shape
Non Rotating Spindle/ Interchangeable Type Universal Micrometer
- Supports measurement of various shapes with 7 types of interchangeable anvils
Three-wire Unit
- For measurement of the pitch diameter of thread
Tooth Thickness Micrometer
- Measures the “root tangent length” of gears
- Compatible modules differ depending on the model
Ball Anvil Type Gear Micrometer
- Used for “over-pin diameter measurement” of gears
- A ball anvil is selected according to the gear
Non Rotating Spindle Type Tooth Thickness Micrometer
- Measures the “root tangent length” of gears
- Compatible modules differ depending on the model
Non Rotating Spindle Type Paper Micrometer
- Micrometer dedicated to measuring paper thickness
- Anvil diameter: 14.3mm
U-shape Frame Sheet Metal Micrometer
- U-shape frame micrometer used for measuring steel sheets
Dial Type Sheet Metal Micrometer
- Easy reading structure that allows measurement read from the ratchet side
- Convenient for steel sheet measurement
Spherical-flat Anvil Type Micrometer
- The measuring face on the anvil side is spherical shaped
Spherical Anvil and Spindle Type Micrometer
- Both measuring faces are spherical shaped
Spherical and Cylindrical Anvil Type Micrometer
- Provided with various rod-shape anvils
Spline Micrometer
- Both measuring faces are slimed
- Convenient for measuring round groove diameter etc
Point Micrometer
- Both measuring faces are taper-shaped
- Convenient for measuring fine parts
V-anvil Micrometer
- Measures the diameter of cylinders that have odd-numbered flutes
- Convenient for measuring taps‚ reamers‚ etc.‚ with odd-numbered flutes
Non Rotating Spindle Type Blade Micrometer
- Both measuring faces are blade-shape
- Optimal for measurement of arrow grooves etc
Can Seam Micrometer
- Dedicated to measuring the edge height etc. of can seams
Hub Micrometer
- Dedicated to measuring the length and thickness of steps in a pipe
Wire Micrometer
- The measuring faces are shaped to be convenient for measuring wire diameters
Crimp Height Micrometer
- Measuring face shape dedicated to measuring the crimp height of solderless terminals
Uni Micrometer
- The tips on the anvil side are interchangeable
- Interchangeable anvils are available
Limit Micrometer
- Used as a limit gage with two micrometer heads
Indicating Micrometer
- An anvil displacement is displayed on the indicator
- Optimal for measurement of large item small scale production parts on shop floors
Snap Meter
- Optimal for continuous measurement of mass production parts
Snap Meter with External Indicator
- Optimal for continuous measurement of mass production parts
- The indicator can be selected for any model
Groove Micrometer
- Micrometer dedicated to groove width measurement
Quick-Mini
- Handy type dedicated to small part measurement
- Optimal for hobby use etc
Small Hole Gage
- Comparison measuring tool for inside diameter groove width etc
- Measuring range: 3 to 13mm with 4 models
Telescoping Gage
- Comparison measuring tool for inside diameter groove width etc
- Measuring range: 8 to 150mm with 6 models
1 | 2
Facebook
Instagram
Linkedin
YouTube
Vietnam 
