Calibration Equipment

Gauge Block Auto-interferomometer GBI
- Interferometric measurement of gauge blocks
- Both steel and ceramic gauge blocks are available

Calculation Type Gauge Block Automatic Check Equipment GBCD-100A
- Evaluates a gauge block with comparison measurement
- Auto-measurement is made

Manual Calculation Type Gauge Block Comparator GBCD-250
- Evaluates a gauge block with comparison measurement
- A single (upper) detector is equipped

Gauge Block for Micrometer Inspection
- Used to inspect the Micrometer
- Provided with Steel and Ceramic

Optical Parallel OP
- Accessory for measuring the flatness and parallelism of micrometer measuring faces

Optical Flat OF
- Accessory for measuring the flatness of micrometer measuring faces
- Used to measure the flatness of precision parts

Micrometer Standard MB
- Used to adjust the zero point of micrometers

Micrometer Standard (for screw micrometer) MB
- Used to adjust the zero point of screw micrometers

Micrometer Standard (V-groove micrometer) MB
- Used to adjust the zero point of V-groove micrometers

Micrometer stand
- Dedicated stand for stable measurement
- Four types are available according to the size

Color Ratchet Stop
- For controlling micrometer measurements

Micrometer Lubricant
- Micrometer lubrication oil

Depth Micro Checker CD
- Zero-point adjusting master dedicated to depth micrometers
- Two models: 150mm and 300mm

CERA Inside Micrometer Checker CI
- Used to properly and easily adjust the zero point of inside micrometers
- Two models: 300mm and 600mm
- The measuring faces are ceramic-tipped

Setting Rings
- Ring for setting the zero point
- A ceramic ring is also available

Bore Gage Zero Checker CCG
- Supports a wide measuring range for setting the zero point

CERA Caliper Checker CC
- Checker for accuracy inspection of calipers and height gages
- Two models of 300mm and 600mm are available
- The measuring faces are ceramic-tipped

i-Checker‚ Indicator Inspection Machine IC2000
- Checker for accuracy inspection of indicators
- Semi-auto measurement and auto measurement

Calibration Tester UDT
- UDT-2 is used for indicators with a graduation of 0.01mm
- UDT-103/105 is used for indicators with a graduation of 0.001mm

Color Cap
- Used for measurement control of micrometers
1 | 2