BH-V Manual CMM Series
(Manual-Floating Type CMM) |
|
|
|
-
Lightweight and compact design.
-
Moving-bridge structure provides excellent stability.
-
Smooth operation because of the high-precision air bearings and lightweight moving members.
-
Continuous fine feed over the entire measuring range.
-
One-touch air clamp for all axis.
-
UD1 counter board supplied provides direct data communication via the PC-AT bus.
-
No obstruction on the large-size measuring table permits easy workpiece handling.
-
BH-V Manual CMM Series:-
(Accuracy U3=(4+5L/1000) um)
504 series - 500x400x400mm
507 series - 500x700x400mm
(Accuracy U3=(5+5L/1000) um)
707 series - 700x700x600mm
710 series - 700x1000x600mm
|
| |
 |
| Bright Strato |
Series 355 |
|
 |
| Features |
-
Temperature Correction
-
High Accuracy and High Speed
-
Vibration-free Operation
-
Complete Wrap Around Covering for Guideways and Bridges
-
Advanced Structural Design with Low Mass/High Stiffness Ratio
-
Excellent Performance/Cost Ratio
-
Digital Servo Controller
-
Bright Strato Series:-
(Accuracy E=(1.4+3L/1000) um)
707 series - 705x705x605mm
710 series - 705x1005x605mm
(Accuracy E=(1.7+3L/1000) um)
910 series - 905x1005x605mm
916 series - 905x1605x605mm
|
|
|
| |
|
| Legex |
Series 356 |
|
 |
| Features |
-
Construction: Minimized base deformation and a fixed bridge eliminates pitching and yawing errors
-
Kinematic Accuracy: Independent X-axis against Y-axis Center-of-Gravity" drive
-
Servo Technology: 32 bit Digital Signal Processor
-
Vibration Control Technology: Floating mechanism reduces internal vibration
-
Length Standard: Near zero expansion linear glass scales
-
Temperature Correction: 18°C to 22°C temperature range
-
Legex Series:-
(Accuracy E=(0.48+L/1000) um)
707 series - 705x705x455mm
710 series - 705x705x605mm
910 series - 905x1005x605mm
|
|
|
| |
|
| Probe |
|
|
 |
|
|
| |
|
| Vision Probe |
|
|
 |
| Features |
-
The affordable QVP vision probe brings your manual or CNC CMM simplicity to a high performance full-size version measuring machine with a minimum cost.
The QVP adds unique functions on the CMM and enable it to measure microscope dimensions and very flat workpieces, which were not possible by traditional contact type probes. With sub-second vision processing speed, the QVP improves the total through-put time of inspection. This increase the measurement efficiency and reduces the cost. Two types of probe connection; auto-joint connector or straight shank are available.
|
|
|
| |
|
Beyond Apex Series
(CNC CMM) |
|
|
|
- Design and constructed with Mitutoyo's patented CNC CMM technology, the Beyond Apex series features lightweight materials and innovative machine structure, providing high travel stability, high accuracy, and affordability.
- As the need for integrated manufacturing and measuring becomes more critical, the need for accurate 3D measuring on the shop floor becomes more vital. Mitutoyo's leading-edge technology provides a solution, the Beyond Apex CMM, capable of real time temperature compensation yielding accurate measurements for a wide range temperature of 16°C through 26°C.
- The Beyond Apex series boasts a complete range of CNC models:-
(Accuracy U3=(2.9+4L/1000) um)
504 series - 500x400x400mm
707 series - 700x700x600mm
710 series - 700x1000x600mm
(Accuracy U3=(3.9+4L/1000) um)
910 series - 900x1000x600mm
916 series - 900x1600x600mm
(Accuracy U3=(4.9+5L/1000) um)
1212 series - 1200x1200x1000mm
1220 series - 1200x2000x1000mm
1230 series - 1200x3000x1000mm
|
| |
|
Bright Premier Series
(CNC CMM) |
|
|
|
- With Real-Time Temperature Compensation.
- High Accuracy and High Speed.
- Wrap Around Covering for Guideways and Bridge.
- Advanced Structural Design with Low Mass/High Stiffness Ratio.
- Preloaded Air Bearings.
- Excellent Cost/Performance Ratio.
- Digital Servo Controller.
- The Bright Premier series boasts a complete range of CNC models:-
(Accuracy U3=(2.5+3L/1000) um)
707 series - 700x700x600mm
710 series - 700x710x600mm
(Accuracy U3=(2.7+3L/1000) um)
910 series - 900x1000x600mm
|
| |
|
Geopak-Win
(CMM Software) |
|
|
|
-
Geopak-Win is a new 3-D data analysis and CMM programming module that operates under the COSMOS system. This module includes all features of the geometric measuring program for CMMs. Its enhanced graphic displays and the built-in interactivity on screen allow an inexperienced operator to measure complex parts, while maintaining the flexibility demanded by power users
|
| |
|
Scanpak-Win
(CMM Software) |
|
|
|
|
| |
|
Statpak-Win
(CMM Software) |
|
|
|
-
Statpak-Win is a statistical analysis module that operates under the COSMOS system. This module is compatible to many recognized international standards including the Ford EU 883 a verification of SPC software, Q1, QS9000, IASO9000, French, Renualt, CNOMO standards as well as German DGC standards
|
| |
|
3D-Tol-Win
(CMM Software) |
|
|
|
|
| |
|
Dmispak-Win
(CMM Software) |
|
|
|
|
| |
| |
| QM-Measure |
|
|
|
-
The QM-Measure employs a cantilever construction, which has 3 open space to make workpiece loading/unloading easy. This also provides the shop operator with obstruction free approach to the workpiece in measurement. The high rigid and well balanced machine body design allows the operator very smooth manual probing with minimum operation fatique.
QM Measure Series:-
Accuracy E=(3.0+4L/1000)um, R=4.0um (0.00016")
QM Measure333 - 300x300x300mm
QM Measure353 - 300x500x300mm
|
| |
|
